Product ID:NAPA CAST IRON #N84-176
MSDS Date:01/01/1994
FSC:3439
NIIN:00D020126
MSDS Number: CCJMG

NAPA, DIVISION OF LINCONLN AUTOMOTIVE

ONE LINCOLN WAY
ST. LOUIS, MO 63120-1578
US

Emergency Phone: 414-255-5520

Info Phone: 414-255-5520

Cage: 050G3

NAPA, DIVISION OF LINCONLN AUTOMOTIVE

ST. LOUIS, MO 63120-1578 US

Telephone: 414-255-5520

Cage: 050G3

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 1-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

GRAPHITE, NATURAL

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 1-11%

OSHA PEL 15 MPPCF; Z-3

ACGIH TLV: 2 MG/M3 RDUST; 9596

POTASSIUM SILICATE

CAS: 1312-76-1

Fraction By Weight: 1-11%

SODIUM SILICATE

CAS: 1344-09-8

Fraction By Weight: 1-11%

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 1-11%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9596

CALCIUM FLUORIDE (AS F)

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: 1-11%

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 35-45%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9596

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 25-35%

LD50 LC50 Mixture:TLV-TWA WELD FUME:5MG/M3.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:WELD FUMES/GASES DANGEROUS TO
HEALTH.SHORT-TERM OVEREXPO TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZ,NAU,DRYNESS/IRRIT OF
NOSE/THROAT/EYES,TIGHTNESS IN CHEST,FEVER,ALLERGIC RX.LONG TERM:SID
EROSIS(IRON DEPOSIT IN LUNGS)WHICH AFFECT PULM FUNCTION.ARC RAYS
CAN INJURE EYE/BURN SKIN.ELECTRIC SHOCK CAN KILL.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENICITY:YES FOR NICKEL.
Effects of Overexposure:DIZZINESS, NAUSEA, DRYNESS OR IRRIT OF
NOSE/THROAT/EYES. ARC RAYS:INJURE EYE, BURN SKIN. ELECTRIC SHOCK
CAN KILL. SIDEROSIS (RION DEPOSIT IN LUNGS) WHICH AFFECTS PULM
FUNCITON. FEVER, TIGHTNESS IN CHE ST, ALLERGIC REACTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL ASSISTANCE. EMPLOY FIRST AID TECHNIQUES
RECOMMENDED BY AMERCIAN RED CROSS.

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES & FLAMMABLES. REFER TO AMERICAN NAT STD Z49.1 FOR FIRE
PREVENTION DURING WELDING.

Handling and Storage Precautions:READ/UNDERSTAND MFG INSTRUCT/PRECAUT
LABEL.FILTER LENSES:RULE OF THUMB:START W/SHADE TOO DARK TO SEE
WELD ZONE,THEN GO TO NEXT LIGHTER GIVES SUFF VIEW
Other Precautions:RECOMMENDED WAY TO DETERMINE FUME/GAS COMP/QUANT
WORKERS EXPO:TAKE AIR SMPL INSIDE WELDER HELMET/WORKER BREATH
ZONE.ANSI/AWS F1.1 AVAILABLE FROM AMER WELD SOC,POB 351040,MIA,FL
33135.SEE AMER NAT STD Z-49.1 & OSHA 29CFR 1910.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESP WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE EXHAUST SYS TO CLEAR WELD FUMES.MAKE SURE INHAL AIR
DOESN'T CONTAIN FUME CONSTIT ABOVE PEL.
Protective Gloves:WELDER GLOVES.
Eye Protection:FCSHIELD W/FILT LENSES(SEE HNDLG PRCAUT)
Other Protective Equipment:HELMET;SCREENS/FLASH GOGG IF NECESSARY TO
SHIELD OTHERS.HEAD/HAND/BODY PROT FROM RADIATION/SPARK/ELECTR
SHOCK.
Work Hygienic Practices:TRAIN WELDER TO KEEP HEAD OUT OF FUMES/NOT
TOUCH LIVE ELCTRICAL PARTS/INSULATED HIMSELF FROM WORK/GROUND.
Supplemental Safety and Health
HAZ DECOMP PROD:USED.ALSO COAT ON METAL BEING WELDED,#OF
WELDER/VOL,QUAL/AMT OF VENTI,POSITION OF WELDER HEAD W/FUME
PLUME,PRESENCE OF ATM CONTAMIN.DECOMP PROD:ORIGINATING FROM
VOLATIZ/RX/OXIDAT OF MA TL + BASE METAL,COAT,ETC.PRESENT AS COMPLEX
CMPDS-NOT METALS.REASON:FLUORIDES,COMPLEX OXIDE
FE,SI,NI,CO,CO2,OZONE,N OXID

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:NA
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:NA
Appearance and Odor:NA
Percent Volatiles by Volume:NA
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:WELD FUME CAN'T BE CLASSIFIED
SIMPLY.COMPO/QUANT DEPENDENT UPON METAL BEING WELD/PROCEDURES
FOLLOWED/ELECTRODE(SUPP)

Waste Disposal Methods:DISPOSE OF ANY GRINDING DUST/WASTE RESIDUES IAW
EPA/LOC REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.